02-24-2016 03:47 PM
I have a MX712 that I've had for a few years without problem right up until I loaded Windows 10.
Now, if I attempt to print something in B&W the page comes up blank.
If I try and print in color, the red & grey seems to print but nothing else will.
When I print the Head Alignement Value, only blue and black print.
Print Nozzle Check Pattern prints fine.
What is going on?
02-26-2016 01:16 PM
Hello.
Try performing 1-2 cleanings to see if this can provide any improvement on the printing issue.
If the issue persists, troubleshooting with our support group will be needed to narrow down the cause of your issue. Please contact our support group using the "Contact Us" link below for additional assistance.
This didn't answer your question or issue? Find more help at Contact Us.
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.