‎05-03-2022 12:47 PM
Hi! So I recently bought this printer MX475 and I know it's kinda old but it was in perfect condition. I have used it a lot and than the black ink was over so I replaced it. Bought an original FINE cartridge. It was printing great enough. After a couple of days, black texts and photos' quality was looking bad as if they were an old quality picture maximized to a 4K screen. Anyway I have been trying everything. I have replaced cartridges, cleaned the encoder strip, cleaned printhead multiple times. Nothing worked and.
And I just realized that when I print things with my mobile phone. They come out near perfect. The texts are readable but because it's printing very fast, sometimes prints can come with white lines. And using the PC at Plain Paper-Standart quality makes them come the same way mobile phone does but I don't want that. I need to use the high quality settings. Thank you for helping me and sorry for my bad English.
‎05-04-2022 05:05 PM
Here are the nozzle check results. After a couple of normal cleanings and a deep cleaning. Please help me I need to take black prints and I can't afford a new printer right now.
 
‎05-04-2022 09:04 AM
The thing I am complaining is that on High Quality mode, texts have some shadow kinda thing outside them but on standart mode, some texts are crisp clear. And on both modes, it can't even print a straight line?
 
 
  
‎05-04-2022 09:28 AM
A much clear comparison.
‎05-04-2022 09:30 AM
 
‎05-04-2022 05:19 PM - edited ‎05-04-2022 05:21 PM
Do you have a new black cartridge to try? If a new black cartridge doesn’t correct the problem you should call the Canon support line for your region and see if they can help. This is a user forum, not and official Canon support site.
‎05-04-2022 05:33 PM
Please just look at this and -if you can- tell me what's the problem? What should I do? Why is the black being distorted like that? And thank you so much for your help.
‎05-04-2022 05:33 PM
I just want your opinion btw nothing more. 🥰
‎05-04-2022 06:16 PM
You've done everything I can think of - nozzle check, deep clean, official Canon inks, encoder strip cleaning.
I would try one more good cleaning of the encoder strip, and if that doesn't resolve the problem I think you are looking at a printer repair/replacement. Just my opinion.
Unfortunately, most consumer products nowadays are not readily repairable. They aren't built to come apart and parts aren't always supplied by the manufacturers.
In the US Canon has a program for reduced prices on replacement for products that can't be repaired or are obsolete because of operating system updates. Maybe Canon Turkey has a similar program.
‎05-05-2022 12:49 AM
Well thank you for your help. I guess it's time for me to buy a new printer but definitely not Canon.
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.