cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MP250 alignment problem

MommaV
Apprentice

I went through all the steps to do an alignment because of the print quality. Still no solution and now the paper gets halfway through when trying to do manual alignment and can't get past it. The printer head, I think, started making a weird noise after the last ink replacement. I want to throw it out the window! Any suggestions?

 

2 REPLIES 2

Patrick
Product Expert
Product Expert

Hi MommaV,

 

You stated that you are performing an alignment because of print quality.

 

Can you describe the print quality issue that you are experiencing?

 

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I did an alignment several times. When the paper got stuck, I had to unplug then restart it. Once that got remedied then there was still shadowing happening. So I looked on Youtube.com and found that I needed to clean the area behind the ink cartridges. That helped. 

 

Momma V

Announcements
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available forRF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!