01-01-2018 10:23 AM
04-20-2018 04:56 PM
Hi Classicphotobym,
A test of your PIXMA MG6821 should be performed. This will tell us if the printer is working correctly. To do this, please load letter-sized paper in the PIXMA MG6821 and follow these steps:
1. Flick the HOME screen and then tap Setup on your PIXMA MG6821.
2. Tap Maintenance.
3. Tap Print nozzle check pattern.
4. Tap Yes.
The Nozzle Check will print. Please compare your printout to the example that has been attached to this email. If they differ, please perform a few printhead cleanings.
To perform cleanings, please follow these steps:
1. Flick the HOME screen and then tap Setup on your PIXMA MG6821.
2. Tap Maintenance.
3. Tap Cleaning.
4. Tap Yes to clean the printhead.
5. Tap Yes to print another Nozzle Check.
Does the Nozzle Check print correctly?
If you continue to have difficulties, please contact our support group using the following link:
http://Canon.us/ContactLI
05-19-2019 12:56 PM
My MG6821 will not print black.
The reference to the printer testing is pure BS.
The link on the lower page puts you in the market to buy a new one !
That is how you treat your customers ?
Well, you are surely a sorry bunch.
I am not asking for a refund, only to get my printer working.
You can bet that I will never buy a Canon product again, if this is what I have to look forward to..
Anyone can build an inferior product and back it up with no service.
Lots of frills and red tape, no customer service.
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.