09-26-2014 08:25 PM
Solved! Go to Solution.
10-14-2014 02:20 AM
Hi Jwpottberg,
We can reset the printer back to its default settings to try and get the copy settings to revert to single-sided printing as a default. To do this, please follow these steps:
1. Make sure that the machine is turned on.
2. Select Setup on the HOME screen.
3. Select Device settings, then touch the OK button. The Device settings screen is displayed.
4. Use the button to select the Reset setting, then touch the OK button.
5. Use the button to select the Settings Only setting, then touch the OK button.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
10-14-2014 02:20 AM
Hi Jwpottberg,
We can reset the printer back to its default settings to try and get the copy settings to revert to single-sided printing as a default. To do this, please follow these steps:
1. Make sure that the machine is turned on.
2. Select Setup on the HOME screen.
3. Select Device settings, then touch the OK button. The Device settings screen is displayed.
4. Use the button to select the Reset setting, then touch the OK button.
5. Use the button to select the Settings Only setting, then touch the OK button.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
10-18-2014 03:25 AM
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.