05-22-2015 11:48 AM
I bought the MX922 because I needed a printer under 18" deep, and the specs on the MX922 say it's 15.6" deep. But when I print, the output tray (the door on the front) drops down, increasing the depth to something like 22". In the tight space I have, the tray does not fully deploy, and the paper output jams.
How can I remove the output tray? I'm hesitant to take a saw to my new printer, but that tray makes the printer useless to me.
Is there a maintenance manual somewhere that describes how to remove the output tray?
04-10-2018 07:55 AM
Is ths a similar procedure for an MX726 ? I've got the same problem where the front tray won't close because the paper extension arm is jammed and won't fold in.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.