08-23-2014 12:00 AM
I have a new PIXMA MX992 with my Mac Mini. Everything prints as it should except 4x6 photos on glossy photo paper from the upper tray. If I load glossy 8x10 photo paper in the lower tray, I can print a 4x6 photo on it perfectly. The same photo from the upper tray on 4x6 paper appears grossly out of focus, blurry, and remains wet for a long time, as it uses way too much ink. When I tried printing a 4x6 photo from the upper tray, on a piece of regular paper cut to 4x6, it printed perfectly. Any idea why I'm getting a truly terrible print with glossy paper?
Thanks in advance for any help.
10-08-2018 09:26 AM
I have the same issue - I am printing on the glossy 4x6 paper that was bundled with the printer and the image is extremely blurry and wet for days! I printed wireless from my cell phone. Can someone help me? extremely fustrating to say the least
10-08-2018 10:11 AM
Hi Carabca,
When the photo is blurry and the ink does not dry, it is most likely caused by printing on the incorrect side of the paper.
Please reload the paper in your printer so you are printing on the other side of the paper.
10-08-2018 10:31 AM
ok will try that - thank you
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.