Showing results for 
Show  only  | Search instead for 
Did you mean: 

Canon Pixma MG3620 Copy / Prints Blank Page


My Canon Pixma MG3620 Copy / Prints Blank Page... Scanning works fine. But if I try to print anything, it prints blank page.


If I try to use as a copier, it prints blank page.


Tried following many times:


1. Hold down the STOP button until the Alarm lamp flashes orange twice, then release it immediately.


2. Tried Printing Preferences - Cleaning / DeepCleaning / Nozzle check, etc.


Just to make things easier, I like to make this printer works like copier. What can I do? I know that Ink is there.


BTW.... I haven't printed since long and I read that it cause this issue. Like to fix it now if I can.


Product Expert
Product Expert

Hi Vipcanon,


Please remove both ink cartridges and ensure that all of the tape/cellophane has been removed from each cartridge.


Reinsert the ink cartridges and perform 1 cleaning and then print.


If there is still no ink on the page, it is recommended that the ink cartridges are replaced with new, genuine Canon ink cartridges.




Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.


It appears the product expert who originally responded to this post may have misunderstood the issue. So allow me to restate. In my case, when I print a single-sided, single page job, the job prints fine. But then a second sheet of paper (blank) passes through the printer and is ejected.

What causes this to happen? And can it be eliminated? FYI, my operating system is Linux Mint.

Thanks. Aitch

12/08/2022: New firmware version is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version is available for EOS-C500 Mark II
05/26/2022: New firmware version is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version is available for EOS R5 C
03/23/2022: New firmware version is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!