09-07-2015 11:57 AM
For K30323 I know pin 1 is the voltage, pin 3 is the ground. Can someone tell me what pins 2,4,5 and 6 are?
On my MX-870 I get a B200 error. The problem may be the printhead but I want to measure the voltage on the 6 pin connector to verify the AC Adapter is working correctly.
09-09-2015 10:06 AM
For assistance with your questions and the error that you described, please contact our support group using the "Contact Us" link below.
This didn't answer your question or issue? Find more help at Contact Us.
09-15-2015 08:08 AM
I gambled and bought a new print head and it got rid of the B200 error. Printer works great again.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 22.214.171.124
PowerShot SX420 IS - Version 126.96.36.199
PowerShot 620 HS - Version 188.8.131.52
PowerShot SX720 HS - Version 184.108.40.206
PowerShot G1X Mark III - Version 220.127.116.11
PowerShot G7X Mark II - Version 18.104.22.168
PowerShot G9X Mark II - Version 22.214.171.124
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.