12-14-2015 09:10 PM
Hello,
We have a Cannon Mg5520 that refuses to pick up any paper unless you physically push the paper backwards while it is attempting to print.
We have run the "Roller Cleaning" about 15 times to no avail. We have turned the printer over and physically cleaned the rollers themselves (although they look perfectly fine, no dust, etc on them) and we still cannot get the printer to pick up the paper.
When we can get it to feed, it prints wonderfully, just can't get it to feed without manual intervention 99% of the time.
Any advice would be greatly appreciated.
Thanks
12-16-2015 10:38 AM
Hello.
Troubleshooting with our support group will be needed to narrow down the cause of your issue. Please contact our support group using the "Contact Us" link below for additional assistance.
This didn't answer your question or issue? Find more help at Contact Us.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.