cancel
Showing results for 
Search instead for 
Did you mean: 

Adjust DVD print diameter

skyking421
Contributor

My new Pixma IP7220 "Garden" software has a CD/DVD printing feature.

It prints to the discs ok, but it leaves a small white border on the inside and outside.

I want to be able to increase the print size, so that the disc print is "borderless", with no white border, just like the Epson software allows.

Is it possible?

1 ACCEPTED SOLUTION

shadowsports
Elite

Not sure if the printer does borderless labels..  but this might help.

 

Image Garden

~Rick
Bay Area - CA
~R5C (1.0.1.1) ~Many Lenses ~DxO PhotoLab Elite ~Windows10 Pro ~EVGA RTX 3080Ti FTW3 Ultra
~ImageClass MF644Cdw ~Pixel6 
~6D2 (v1.1.1) retiring

View solution in original post

4 REPLIES 4

shadowsports
Elite

Not sure if the printer does borderless labels..  but this might help.

 

Image Garden

~Rick
Bay Area - CA
~R5C (1.0.1.1) ~Many Lenses ~DxO PhotoLab Elite ~Windows10 Pro ~EVGA RTX 3080Ti FTW3 Ultra
~ImageClass MF644Cdw ~Pixel6 
~6D2 (v1.1.1) retiring

Thanks, Rick

Yes, the "Image Garden" software does allow some adjustment to print diameters, but it does not allow the DVD to go fully borderless.  I suppose that they don't want ink spilling over the edge.

I guess it is good enough, although Epson allowed for full borderless.

Thanks again!

Greetings,

Glad it helped.  Back in the day, I printed borderless lables on an Epson printer as well.  I stil have my CD Stomper labeling kit.  The printer has long since died and was never replaced. 

 

Cheers 

~Rick
Bay Area - CA
~R5C (1.0.1.1) ~Many Lenses ~DxO PhotoLab Elite ~Windows10 Pro ~EVGA RTX 3080Ti FTW3 Ultra
~ImageClass MF644Cdw ~Pixel6 
~6D2 (v1.1.1) retiring

T-Mac
Contributor

The My Image Garden software itself is likely the problem. I have an MX922 and have the same white ring around all my disc prints when using that program. With third party software, I can print the full disc face. Nero CoverDesigner and Disketch both are capable of doing so. Unfortunately, they probably won't print correctly with the default settings, and you will have to do some trial and error to get the print centered and sized properly. It can be a messy process. Not only can third party software print to the edge of the disc, it can keep going and print all over the tray. Once you get it set properly you can save the settings, clean your tray, and be good to go.  

Announcements
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
03/22/2022: New firmware version 1.2.0 is available for PowerShot PICK
03/16/2022: New firmware version 1.5.2 is available for EOS-R5
03/16/2022: New firmware version 1.5.2 is available for EOS-R6
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.1.1 is available for EOS-R3
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x
12/7/2021: New firmware version 1.1.1 is available for CR-N 300
12/7/2021: New firmware version 1.1.1 is available for CR-N 500
12/2/2021: New firmware version 1.1.0 is available for RF 70-200 F4 L IS USM