cancel
Showing results for 
Search instead for 
Did you mean: 

ImageBrowser EX

Granus
Apprentice

I have an SX 10 iS and run its photo files into a WIN XP computer. We have just purchased a new computer running WIN 8 through a 64 bit  AMD quad core processor. Assuming the old ZoomBrowser would not work with the new computer, I went to  Canon's web site where I ended up with  ImageBrowser EX. It was downloaded and, with the camera connected and turned on as instructed, the app was run. It recognized the camera immediately and installed without incident. The installation was apparently correct as the app launches nicely and appears to function correctly, though no photo files have been loaded yet. However, it will not see the camera when it is linked (USB) to the computer. Can anyone offer a suggestion?

2 REPLIES 2

Mykolas
Authority

Granus,

 

You will also need to make sure you have the update to CameraWindow DC 8.8 installed.  It was listed directly below the ImageBrowser EX update on the Canon USA website.  For your convenience, I have included a link to the download page below:

 

http://www.usa.canon.com/cusa/support/consumer/digital_cameras/other_powershot/powershot_sx10_is#Dri...

 

CameraWindow DC is what is actually used to import images from your PowerShot SX10 IS.

 

If this is a time sensitive-matter, additional support options are available at Contact Us.

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Photog82
Contributor
Hi,

Canon ZoomBrowser will work, trust me, it's 100% better than the horribly clunky, choppy, slow software called ImageBrowser EX.

If you install ZB you can use the built in software to download the photos from a memory card reader or by using a USB cable connected to your camera.
Announcements

07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/30/2022: Service Notice: EOS 70D: Error 70 or Error 80
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x
12/7/2021: New firmware version 1.1.1 is available for CR-N 300
12/7/2021: New firmware version 1.1.1 is available for CR-N 500