11-22-2024
05:41 PM
- last edited on
11-22-2024
06:45 PM
by
Tiffany
I bought a )USB A) to (mini USB) and i connected it to my pc but when i turn on my camera (Canon Rebel T7) i get no response my pc pops up with nothing even in the files there nothing or in photos does any one know why this is?
Solved! Go to Solution.
11-22-2024 08:06 PM - edited 11-22-2024 08:08 PM
Axzl_08,
Detailed instructions can be found on page 317 of the manual.
1) Disable Wi-Fi /NFC. To do so, hit the Menu button next to the bottom right corner of the back screen and navigate to the last "Wrench" menu, highlight the Wi-Fi/NFC option and press the "Set" button to switch that option to Disable.
2) Make sure you are using a USB A-Male to Mini-B transfer cable.
Good luck!
LZ
11-22-2024 08:06 PM - edited 11-22-2024 08:08 PM
Axzl_08,
Detailed instructions can be found on page 317 of the manual.
1) Disable Wi-Fi /NFC. To do so, hit the Menu button next to the bottom right corner of the back screen and navigate to the last "Wrench" menu, highlight the Wi-Fi/NFC option and press the "Set" button to switch that option to Disable.
2) Make sure you are using a USB A-Male to Mini-B transfer cable.
Good luck!
LZ
11-22-2024 08:17 PM
Thanks a lot man your amazing!
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.