cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

How best to increase exposure

kvbarkley
VIP

We were at the Palm Springs Air Museum Memorial Day event (Worth a look if photographing WWII planes up close is your bag*) Anyway, since my Son is taking a Digital Photography class and has a Photojournalism assignment coming up, I let him use the T6S to take some pictures. Someone must have hit the QCD** and set the exposure to -3, so some of the images are underexposed.

 

These are JPEGS, so would it be better to use ACR and the expsoure adjustment or Photo Shop Elements Enhance and then Lighten or something else?

 

I will probably try both, but wanted to see if there were any suggestions for something I might have missed.

 

 

*https://palmspringsairmuseum.org/special-programs/

 

** People say it is such a great thing, but it has only caused me grief. I have just set the lock.)

10 REPLIES 10

Waddizzle
Legend

@kvbarkley wrote:

We were at the Palm Springs Air Museum Memorial Day event (Worth a look if photographing WWII planes up close is your bag*) Anyway, since my Son is taking a Digital Photography class and has a Photojournalism assignment coming up, I let him use the T6S to take some pictures. Someone must have hit the QCD** and set the exposure to -3, so some of the images are underexposed.

 

These are JPEGS, so would it be better to use ACR and the expsoure adjustment or Photo Shop Elements Enhance and then Lighten or something else?

 

I will probably try both, but wanted to see if there were any suggestions for something I might have missed.

 

 


Bumping up the exposure by 3 Ev in a JPEG gets ugly.  Instead of the image getting brighter, it just looks like someone is shining a flashlight on a print.  Try it, you'll see.  If it were RAW, the image will actually get brighter, but so will the noise. 

 

LR can do a pretty good job of removing that much noise, though.  Maybe PSE can remove noise, too.  I'd suggest that you reshoot, if you can.

--------------------------------------------------------
"The right mouse button is your friend."

It was a one shot event.

 

Luckily there are no shadows. It was outside in 107 degrees. 8^)


@kvbarkley wrote:

It was a one shot event.

 

Luckily there are no shadows. It was outside in 107 degrees. 8^)


PSE seems to do a much better job than DPP, I hate to say it.

--------------------------------------------------------
"The right mouse button is your friend."


@Waddizzle wrote:

@kvbarkley wrote:

It was a one shot event.

 

Luckily there are no shadows. It was outside in 107 degrees. 8^)


PSE seems to do a much better job than DPP, I hate to say it.


DPP has never been very effective on JPEGs, although Version 4 is better than its predecessors.

 

If you plan to edit a picture with DPP, you should shoot in RAW.

Bob
Philadelphia, Pennsylvania USA

kvbarkley
VIP

I just used Photoshop Elements' auto enhance which did a pretty good job. PSE would not let me use ACR on JPEGS, grr.

 

Here are some examples and a detail of the sky noise which I could probably smooth if I wanted.

 

IMG_1693_shrunk.jpg

 

IMG_1693_edited-1-shrunk.jpg

 

IMG_1894_shrunk.jpg

 

IMG_1894_editshrunk.jpg

 

IMG_1894_Detail.png

 

I did this in a few seconds to a screen capture of the first photo using Picasa so all is not lost. A little improvement from each program may get it done. Just make copies of the originals & test out what each program is capable of. 

 

How best to increase exposure - Canon Community - Mozilla Firefox 5312017 50020 PM.jpg

"A skill is developed through constant practice with a passion to improve, not bought."

KBeat
Contributor

If you were on a Mac, I was going to suggest trying the Auto Enhance tool in Photos which can do wonders with JPEGs. However, it looks like you're on a PC and getting good results with PSE.

 

FWIW, if you have an iOS device, there are some apps in that eco system that are amazing with JPEGs as that's an entirely JPEG world. You should have no problem salvaging those images. 

jimmy1
Contributor
Can you do Layers? If so duplicate the layer and set the blending mode of the upper layer to screen. If it's still not light enough repeat the process until you're satisfied.

jimmy1
Contributor

I endorse the recommendation to duplicate the layer and set the blending mode of the upper layer to screen. If it's still not light enough repeat the process until you're satisfied.

 

And have you tried Canon's own software, Digital Picture Pro? 

Announcements
03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.