06-29-2024
12:48 PM
- last edited on
07-25-2024
08:00 AM
by
James_C
Hello. I bought a GP-E2 for my Canon 7D in the hope of capturing and attaching coordinates to the meta data in the photos I take.
I've attached the unit to the camera via a USB cable, but when I go to the "GPS Device Settings" menu, it says, "This menu cannot be displayed. GPS unit is not connected."
Well, I obviously have the unit attached and powered on. Since this is a 7D, the hotshoe connection won't work with the GP-E2, hence the USB cable, as described in both the camera and GP-E2 manuals.
I've also tried to attach the GP-E2 to the USB port on the WFT-E5A, but the WFT Settings -> USB device connec. option tells it's an "Incompatible USB device". Huh? It's a friggin' Canon GP-E2!
I've tried several USB cables, and I'm wondering what else could be wrong. The GP-E2 does show up on my computer as a Canon GP-E2 when I connect it, so I believe that means the cable must be working.
Any ideas?
07-25-2024 05:26 AM - edited 07-25-2024 05:39 AM
One month later I got the cable. Works with 7D firmware 2.0.3 and GP-E2.
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.