01-08-2018 06:57 AM
I have a HF R800 mainly to record lectures, I also have a regular external mic,
when i plug in the mic, it stops to record audio, if I unplug the mic then the machine does record audio
also the mic works on other machines
03-19-2018 01:30 PM
Thanks for that!
Question: How are you mounting this microphone on your camera or mic stand, since the mic looks like it comes with a "hotshoe" mount?
03-19-2018 05:20 PM
I use a cold shoe bracket to hold the mic and camera on my shoulder rig at the same time.
04-05-2018 02:22 PM - edited 04-05-2018 02:26 PM
05-05-2020 02:25 PM - edited 05-05-2020 02:32 PM
I have found that the TRRS plug is for phones and tablets that allow you to use a non-powered mic in the headphone jack. That won't work for this camera. You need the TRS plug - but the mic has to have its own power supply. The Canon documentation is kind of misleading (by omission); There are 1000's more non-powered 3.5mm mic's out there than there are powered mics. As a minimum, you would need something like this: CVM-V30-PRO- powered Microphone-Super-Cardioid Directional mic (Find on Amazon). This was about $59. I didn't take the time to find one cheaper, but you probably can. Just make sure it is TRS or has a TRRS to TRS adapter AND that it is powered.
06-11-2020 04:01 PM - edited 06-11-2020 04:02 PM
I have a Bluetooth wireless mic that I used on my HF R700 with no problems. Then I ordered a lapel mic and connected it first to the Bluetooth mic and then to the jack in the camcorder itself. Now NEITHER external mic works. Like most of you, the only reply I got from Canon (on another thread) was basically "Gee whiz, it should work."
Without the external mic, this camcorder isn't useful to me. I will probably have to buy a new one, and it will definitely NOT be a Canon.
06-11-2020 10:04 PM
06-12-2020 09:06 AM
Thanks for your thoughts. The Bluetooth mic has a transmitting mic with a receiver. I clip the mic on my lapel and connect the receiver to the external mic jack on the camera. It worked great, but the mic was sort of big and clunky and didn't look that great so I bought the lapel mic thinking I would wear the transmitter out of sight with the lapel mic plugged into it. First time I tried it, the camera's external mic jack quit working, so I ditched the lapel and tried to go back to what I had used before, but now it won't work either.
06-12-2020 10:05 AM
I am assuming that you are simply recording to an SD card and not out via an HDMI cable to streaming software. If so, do you have the recording level meter onscreen? Is there a possibility that you have reduced the mic volume level in Settings to zilch? Is the input volume set to A or M? Does the camera's internal mic levels work? Plugging in external mic is automatic. Assuming all settings are correct, and you connect a mic that has been verified to work in your computer or other device, and you internal mic is working, then it could be that the mic jack is not being enabled when you plug in. Other than that, I don't think there is anything else you can do.
03-22-2018 05:45 PM
Without offending . . . your answer is way too tecky. I'm just a simple guy trying to get my Canon product to work. I too have returned a Vixia HF R800 camcorder because I thought the device was broken. My previous Kodak camcorder DID work with an external microphone that wasn't powered. So I still sit here not getting a simple honest answer to how to make the external MIC port work.
I would like to run a mic cord to the front of the meeting room, or get a remote mic, but I'd prefer not having to try over and over again.
I did find that a TRRS headset for my Galaxy phone worked on it. So my next test is a TRRS to TRS male by female adapter.
04-03-2018 02:16 PM
I found a very reasonable Wireless Lavalier MIC set that seems to work very well. I don't know if this allows me to post URL's so I'll paste the description on Amazon.
Wireless Camere Lavalier Microphone Filmmaker Kit, EACHSHOT COMICA CVM-WM100 Professional UHF 48 Channels 100m Distance Omni-directional Mic for Canon Nikon Panasonic Sony, Camcorder ,Smartphone.
I was even able to plug the wired microphone that would not work on the Canon camera into the transmitter and it also worked and sounded great. It does take 2 double "A" batteries in both the receiver and transmitter and I don't know how long they will last, but they can be switched out very quickly.
Best of luck.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 220.127.116.11
PowerShot SX420 IS - Version 18.104.22.168
PowerShot 620 HS - Version 22.214.171.124
PowerShot SX720 HS - Version 126.96.36.199
PowerShot G1X Mark III - Version 188.8.131.52
PowerShot G7X Mark II - Version 184.108.40.206
PowerShot G9X Mark II - Version 220.127.116.11
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.