02-19-2020 07:18 PM - edited 02-19-2020 07:20 PM
Hi, so i just got a yongnuo speedlite to use on an 80D but i have this problem where the speedlite icon blinks where the flash compensation icon goes and when i fire it sometimes syncs and sometimes it doesn't so i end up with some of the images well exposed and some to dark. Its on ETTL mode, no first courtain; i've cleaned the contacts in case it was that but to no success.
Also when i put it in manual mode it works just fine.
02-20-2020 08:14 AM
@Pedro89 wrote:Hi, so i just got a yongnuo speedlite to use on an 80D but i have this problem where the speedlite icon blinks where the flash compensation icon goes and when i fire it sometimes syncs and sometimes it doesn't so i end up with some of the images well exposed and some to dark. Its on ETTL mode, no first courtain; i've cleaned the contacts in case it was that but to no success.
Also when i put it in manual mode it works just fine.
Why "no first curtain"? Isn't first-curtain synchronization the more common setting, at least when using a Canon flash? Have you tried it the other way?
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.