08-31-2020 10:56 PM
Has anyone experienced the problem where you turn on the 600EX-RT and nothing happens? A few nudges and bumps of the flash in my hand and the power comes on?
Put in fresh batteries and made sure all the contacts were clean... but it seems to be happening more and more often.
Anybody else experience this with the flash? I have 2 of them now that are doing this.
09-01-2020 05:14 AM
09-01-2020 12:18 PM
Yes... I read about the problem with the SCH-E1 Color Filter Holder. I only have a MagMod attached. I havn't heard anything about the magnets in the MagMod affecting anything?
09-01-2020 12:21 PM
I could easily believe that the SCH-E1 uses a magnetic sensor. I would remove the filter holder and try the unit for a while.
04-13-2022 09:16 PM
Man, this is happening with me, and im not using either filter or filter holder.
04-13-2022 09:20 PM
Anyone could help me? @canon :Re
10-09-2022 04:31 AM
See my post of Oct. 9, 2022. So done with the Canon battery issue!!
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.