11-03-2023 10:49 PM - last edited on 11-04-2023 09:12 AM by Danny
I’m using a Godox XPro C trigger connected to an AD200 Pro speedlite, with my EOS RP. Despite the trigger successfully communicating with the speedlite (I can make it flash by manually pressing the trigger) I can’t get my flash to work when I press the shutter on the RP.
The trigger is being registered by the camera (there’s a little lightning icon that appears when I connect it), but still it won’t flash. What could be going on?
Firmware seems to be up to date. Same channel, same group, no ids set, etc.
11-05-2023 08:47 AM
Is the camera set to mechanical shutter. If so your speedlite is INCOMPATIBLE.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.