cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

cloth, need print settings Pixma Pro-100, onto 8mm Fabrisign coated habotai silk, Mac10.11 CS5 Ps Ai

DNArtist
Apprentice

Seeking advice on optimum print settings w/ Pixma Pro-100, onto 8mm Fabrisign coated habotai silk cloth manu. by Jacquard for Dharma Trading Co. MacbookPro OS10.11 I have Adobe CS5 Photoshop and Adobe Illustrator. 

1 REPLY 1

Michael
Product Expert
Product Expert

Hello.

 

We are not familiar with the media that you are writing about.  If the media is compatible with inkjet printers, contact the manufacturer to see if they can provide recommended settings for various printers.

 

Additionally, make sure that the media is not too heavy or thick for the printer, as this may lead to jams or other hardware issues.

 

Here are the supported weights/thicknesses of the two trays:

 

Rear tray: More than 28 lb (105 g /m2) (plain paper except for Canon genuine paper)

Manual feed tray: More than 23.6 mil (0.6 mm) in thickness or more than 93 lb (350 g /m2) in weight

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.