03-24-2018 08:40 PM
Hello, I've been battling with my Pro9000 for the past several months. It's probably on its way out and I'm not quite sure why. This most recent problem is truly baffling: Everything seems normal, the print job is accepted, the paper runs through while the print head goes through the motions as if things were fine... but no ink is actually applied to the paper.
Before this, I had a problem where the printer wouldn't turn on (this was about a month or two ago). My quick troubleshooting led me to plug the Pro9000 into a different power outlet and hold down some buttons until things happened, and somehow this worked.
Additionally, I'm using third-party ink cartridges. They were working fine for a bit, until now.
Any insight about this anomoly is greatly appreciated. My guess is this printer is unfixable now, but I haven't given up just yet.
Thanks,
Rick
03-25-2018 07:02 PM
A bit of a follow-up: In my recent attempts to get this Pro9000 working, I see that the printouts it creates now have a very faint amount of ink (with some areas being devoid of ink). So the problem is mainly that the Pro9000 is using a very small amount of ink - and not all of the colors.
05-04-2018 12:20 PM
Hi rickvodicka,
It is recommended that you contact one of Canon's Technical Support Representatives. To contact a Technical Support Representative, please use the link below:
http://Canon.us/ContactLI
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.