10-03-2014 12:29 AM
I have now struggeled with this for months. Cannot get desant B&W prints. They all turn out to be sepia or brownish. I print from Photo Shop Elements 11 using Print Studio Pro. Yes the B&W tag is checked. The only way would be to remove all the color cartridges, but then the thing does not print. Should I buy a separate dedicated B&W printer?
10-03-2014 06:47 AM
Are you working from a color image that you want to print in B&W or are you trying to print an image you have converted to B&W in software?
10-03-2014 09:22 AM
10-03-2014 09:33 AM
The B&W option is for converting color to B&W, or when you want to print a B&W print and adjust the tone. Try unchecking that option and printing. I get very good results that way.
Here are manuals: https://www.cubbyusercontent.com/pl/Canon+Pro-100+Manuals/_9e886cddfbc04caa9248d99e17228c5b
10-04-2014 05:32 AM
10-04-2014 06:57 AM
09-01-2020 06:47 PM
Love my Pro 100 for years, but it recently turned on me and began printing my prized B&W (scanned from negatives, some 50 years old) with a muddy sepia tint. Gone were the sharp blacks and whites, the contrast, the print looking like it did on the monitor.
I tried cleaning the print head. Changed all the inks. Went outside, turned around three times and grunted real hard.
Any suggestions, anyone?
Don the Novice
09-01-2020 07:35 PM
Try reinstalling the driver and then verify all in-driver settings.
Print a standard test print like the Outbackphoto test print.
09-02-2020 01:28 PM
Many thanks for the reassuring response. Light at the end of the funnel.
I downloaded what I think is the Pro 100 driver (novice, remember?), and did the "Save" command, whereupon it went into the files someplace.
Question: does it do the rest (e.g., replace the defective driver) by itself, or is there another step? And I am not sure what is meant by "verify the driver". Sounds like a query of some kind, si?
Sorry to be such an ignoramus on this (e.g., my VCR still blinks "Midnight, Midnight").
09-02-2020 03:31 PM
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 126.96.36.199
PowerShot SX420 IS - Version 188.8.131.52
PowerShot 620 HS - Version 184.108.40.206
PowerShot SX720 HS - Version 220.127.116.11
PowerShot G1X Mark III - Version 18.104.22.168
PowerShot G7X Mark II - Version 22.214.171.124
PowerShot G9X Mark II - Version 126.96.36.199
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.