03-19-2015 07:17 AM
I have a Canon Pro-10 printer. It is known that in the printer settings if you set the Media Type to a fine art paper then the driver enforces a 30mm margin on the print. So if you try to print from Lightroom but have 10mm margins it refuses to print until you change something.
Now I can get around this by setting the Media type to a photo paper so I could print edge to edge on a fine art paper.
My question is;
As I can set the paper size in the Page Setup dialog, I have colour managed by Lightroom and I use the correct ICC profile for the paper/printer, does this Media Type setting actually do anything in respect of the print? I have printed some canvas prints and I can see no difference in the print quality?
Solved! Go to Solution.
03-19-2015 09:00 AM
03-19-2015 09:00 AM
03-19-2015 09:11 AM - edited 03-19-2015 11:09 AM
Thanks. Thats what I thought also.
This explains it...
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.