cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Print studio pro - rotating pictures

Pilami
Apprentice

Hi, 

for a book printing project I need to rotate the picture in print studio pro - sometimes it does that, sometimes not. even if it turned it in yesterday's print session it does not mean, it will turn it today as well.

what am I doing wrong?

what does it need to be able to turn prictures, anz specifications? My guesses so far: no layers and it needs to fit on the page without scaling - true?

but there seems to be sth else

thank a lot

Katrin

 

5 REPLIES 5

jrhoffman75
Legend

You can get PSP manual here:

 

https://www.dropbox.com/s/h3kf2tt2zmds7lr/PrintStudioPro_V2.0_Win_EN_V01.pdf?dl=0

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

Pilami
Apprentice
Thanks a lot - but I am afraid that the manual there are no specs as to why the rotating sometimes works and sometimes not. The manual says rotakting is always possible.
But with me it is not and I wonder what is the reason for that.

Issues like that are hard to diagnose without really knowing what you are doing, and even then may not be possible remotely. 

 

What at software are you using. Is the image size compatible with the page you want to rotate into?

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

Hi,
I am working with PS CC 2015.5 and Lightroom CC (2015). The files are flattened and with 300 dpi size is 11.8 inch on  16.5 paper, I want to print it without any scaling.

The paper is ready made for a book binding (there are holes on one side) and the printer does not like to be fed with the punched side first - so I have to rotate the picture to get the rigth orientiation for printing a right-hand page.

 

 The printer ist a prograf pro 1000.
I am printing with ICC profile.

I can't help. You could give Canon a call at 1-800-OK-CANON.

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic
Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.