cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

PIXMA Pro9000 Mark II on Windows 11

daveatrunfast
Apprentice

Is my PIXMA Pro9000 Mark II compatible with Windows 11 - i can't seem to have the laptop find the printer.  HELLLLLP!!!!! 

8 REPLIES 8

jrhoffman75
Legend

Canon doesn’t list a W11 driver on the support site. 

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

[i am not very technical with these things]

so does that translate to "I am SOL on getting the two machines to talk to each other"?

That is my assessment. You could give Canon a call at 1-800-OK-CANON for their answer. 

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

daveatrunfast
Apprentice

[i am not very technical with these things]

so does that translate to "i am SOL on getting the two machines to talk to each other"?

alancanon
Apprentice

I just downloaded the Windows 10 64-bit driver and it seems to be working for me. At least for the couple of test prints I did.

Alan - would you mind sharing where you found the driver? On the official Canon website I can't seem to find them:

https://www.canon.co.uk/support/consumer_products/products/printers/inkjet/pixma_pro_series/pixma_pr...)

thekoos
Apprentice

Hey there. Not sure if this is still relevant but I had the exact same issue with Windows 11 not detecting the printer and there not being a driver installation from Canon. The solution is pretty simple: Plug the printer in to the computer and switch it on. Open Device Manager and look under the Software Devices category. There should be an entry for the 9000Pro. Right click the pro9000 entry and select the update driver option and then Search automatically for drivers. Once the drivers have been updated the printer will appear in the Printers category and the spooler will be setup so you can print. Hope this helps....

 

Screenshot 2022-08-27 134715.png

You are a genius, thank you. I have been trying this for hours, and after seeing your post it was easy. Thank you

 

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.