12-05-2022 04:20 PM - last edited on 12-06-2022 09:18 AM by Danny
Struggling with my new canon pixma 200 printer. chose this as it handles 300gsm card stock and quality of print.
I'm not getting a colour rich enough print as compared with my old HP printer. I'm using same quality card but seem unable to adjust colour management to produce the quality print I need.I'm a colour pencil artist and need my work to print true to colour and definition. The image below on left is what I need to achieve, image on right is what my pixma is producing. Any help would be really appreciated. \thanks
12-05-2022 04:31 PM
Welcome to the Canon forum!
So that the Community can help you better, we will need to know what program you are using to print from as well as the operating system/version on your computer. Any other details you'd like to give will only help the Community better understand your issue.
If this is a time-sensitive matter, click HERE search our knowledge base or find additional support options HERE.
12-05-2022 04:38 PM
using canon installation software
12-05-2022 07:20 PM
What software are you printing the image from?
12-06-2022 04:23 AM
canon pro software
12-06-2022 07:02 AM
Sorry. I do not know what this software is. Can’t assist.
12-08-2022 04:19 PM
The number one reason why prints come out not looking good is a misadjusted monitor. If you can't see the correct image on your monitor how do you think you can print it? You see the printer does not take info from the monitor to make the print. So if the monitor isn't showing you exactly what the print will look like you get poor results.
You can d/l test prints and you can check the print head.to make sure the printer is working properly.
From the Start menu, select Settings.
Select Bluetooth & devices.
Select Devices and printers on the right.
Right-click on the corresponding printer driver icon.
Select Printer Properties from the pop-up menu.
Select the Print Test Page button.
12-08-2022 05:44 PM
Thanks, done all that
12-09-2022 10:48 AM
Call Canon support 1 (800) 652-2666
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 126.96.36.199
PowerShot SX420 IS - Version 188.8.131.52
PowerShot 620 HS - Version 184.108.40.206
PowerShot SX720 HS - Version 220.127.116.11
PowerShot G1X Mark III - Version 18.104.22.168
PowerShot G7X Mark II - Version 22.214.171.124
PowerShot G9X Mark II - Version 126.96.36.199
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.