03-30-2024 07:08 AM - last edited on 03-30-2024 09:05 AM by Danny
Hi, I have a canon pro 200 which I have had for nearly two years now and as of yet not really had a good print.
the prints are sharp but the problem is the colours, they are flat and dull, no matter what I do.
I use adobe for all my editing and printing. can someone help and maybe advise why they are so dull.
I only use canon inks and I use ilford gallery satin photo paper
thank you in advance
Denise
03-30-2024 11:32 AM
1. Have you run a nozzle check to ensure all inks are printing properly?
2. Have you printed a standardized test image?
http://www.outbackphoto.com/printinginsights/pi049/essay.html
03-30-2024 12:02 PM
Thank you for your help. I will try the nozzle test and a standardised picture. It is certainly worth a try
Denise
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.