05-13-2018 09:59 PM - edited 05-13-2018 10:05 PM
Hi guys,
Our printer has been doing this for a wlittle while and have tried all the adjustents, maintenance we can hink of to rectify the issue.
Basically, it is printing a double image in the verticle direction but only for the first ince of every print.
It doesn't however do it when you print a nozzle check page (it seems).
FYI: It has two brand new Print Heads & brand new purge unit. - did not fix or help the issue.
Problem:
Nozzle check page:
Allignmnent Page:
We're at a complete loss with this one. Any suggestions would be a huge help! thanks!!
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.