04-05-2020 07:43 PM - edited 04-05-2020 07:50 PM
I havent been using my printer so i haven't been doing my firmwares updates like i should. I missed 1.2 and 1.3, now i want to update it to the latest firmware and it keeps giving me an error. I have tried my windows 10 and windows 7 and both are giving me the same error while updating the firmware. it shuts down the printer mid way and says it cannot connect to the printer. no data transfers. drivers are installed on the computer and it works, and it can print. i just want to update the firmware. If someone can kindly help me with this, thank you in advance.
06-11-2020 10:34 PM
06-11-2020 10:29 PM
06-06-2020 01:52 PM
06-12-2020 10:55 AM
My 2 cents. I haven't read the entire thread but in my work I avoid printer firmware upgrades like the Covid if the printer is running properly. I don't trust the manufacturers and know they will slip into the firmware code that will prevent one from using 3rd party inks (which I've used for more than a decade for different printers. FWIW, when a printer is running a complete set of the manufacturer's inks I print a sample print that has each color individually printing it's own color, then when I install 3rd party inks I do the same test printing. I've found little to no color difference between these and hold onto them in a Printers folder and keep a set posted in my printing room to note changes when exposed to room light.) I just lost my networked Epson office printer due to someone on the network (spouse) updating the drivers/firmware thinking they were doing a good service. This gave me immediate printing artifacts which I developed a workaround for but finally had to get rid of it. Moral of the story, don't upgrade the firmware unless you know all of what it's intended to do.
06-14-2020 04:33 AM
06-14-2020 12:59 PM
How is this possible via wifi? The firmware update utility that I downloaded is for USB only.
short feedback: updated my printer to the new firmware via wifi. Took me 2 minutes, resetting the cartridges is still possible
07-14-2020 05:25 PM
the alias is PRETENA .. sound like PRETEND to me. cannot update via wireless
07-12-2020 04:37 PM - edited 07-13-2020 01:14 AM
Hi, have you some news?
08-20-2020 07:16 PM - edited 08-20-2020 07:18 PM
Add another user that can't update their firmware. Just a note, I saw on the Jose Rodrigues youtube channel that the older firmware cause too much ink to be used to maintain the printhead. He says that the newer firmware resolves this issue, so if true, this is a very important update.
By the way, I am trying to update my PRO-10. I also have a Pro-100, on which I am going to attemp the update. I will post the results for that machine.
08-20-2020 07:43 PM
My Pro-100 successfully updated from firmware version 2.001. No issues. Still can't get the Pro-10 to update, but it is on firmware version 1.1.
Maybe if we could find the updater for 1.1 to 2.001, then maybe we could update in steps to 2.0031?
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 18.104.22.168
PowerShot SX420 IS - Version 22.214.171.124
PowerShot 620 HS - Version 126.96.36.199
PowerShot SX720 HS - Version 188.8.131.52
PowerShot G1X Mark III - Version 184.108.40.206
PowerShot G7X Mark II - Version 220.127.116.11
PowerShot G9X Mark II - Version 18.104.22.168
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.