cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Canon Pro-1000 Printer Nozzle Check Problem

wbailey95
Apprentice

Hello,

I have recently run into a problem with my Canon Pro-1000. When running a nozzle check (image attached) the Photo Black seems to show some inconsistencies while the upright bars for each colour also seem to have issues. 

Prints come out with significant banding of the black colours and the last 4-5cm of each print is always darker than the rest of it.

I have followed the guidelines of cleaning/deep cleaning etc but not had any luck with improvements. 


Does anyone have any suggestions on what to try next to resolve the issue? Any ideas would be greatly appreciated!

 

63606317-60D9-42E8-8999-D6D69F880B06.jpeg

B2A38CAA-75A6-423F-AF6C-ADD0637A7FF3.jpeg

1 REPLY 1

Patrick
Product Expert
Product Expert

Hi wbailey95,

Because performing multiple printhead cleanings did not resolve this issue, it is recommended that you contact one of Canon's Technical Support Representatives via phone or chat. To contact a Technical Support Representative, please use the link below:

https://mycanon.usa.canon.com



 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.