02-09-2023 07:36 PM
I bought a used Pro-10 for $100 and was sure to clean the printhead before using it and all the inks show to be almost half way full except yellow which is empty but I tried using it for the first time to print a black and white image and it barely printed. It looks like how it should if I printed with near empty cartridges but it shows them as being near half full. There's no way that's normal right? I'm hoping they're just old cartridges or something and nothing's wrong with the printer.
02-09-2023 07:55 PM - edited 02-09-2023 07:56 PM
The Pro-10 is a pigment ink printer. If it has been sitting a while unused it is possible the ink has dried up in the head. Run a nozzle check and see what is printing. If necessary run cleanings or deep cleanings.
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 22.214.171.124
PowerShot SX420 IS - Version 126.96.36.199
PowerShot 620 HS - Version 188.8.131.52
PowerShot SX720 HS - Version 184.108.40.206
PowerShot G1X Mark III - Version 220.127.116.11
PowerShot G7X Mark II - Version 18.104.22.168
PowerShot G9X Mark II - Version 22.214.171.124
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.