10-29-2021 10:14 AM
Hi
My Pro-1000 has started leaving some black lines at the leading edge of the print. I have done a nozzle clean, a roller clean and a bottom plate clean. Does anyone know what is causing this? The example in my picture is in the middle of an A4 piece of paper but there are some other much fainter smudges nearer the top i.e. to the right of those shown in this image.
Thanks
Neil
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.