07-04-2024 12:27 PM - last edited on 07-09-2024 10:47 AM by Danny
I own a old canon ipf6000s, to be able to print i used my super-old mac. Now my old mac wont start.
I was able to print with another old mac, not sure how, but it worked, for a while. Then the grey ink needed replacement, now after changing the cartridge and loading a new roll of paper i cant print at all. Everything looks fine but the printer doesnt react when i print something. I use a usb.
This is the mac i have:
10.11.6
Osx el capitan
What can i do? is there any way around this?
Solved! Go to Solution.
07-04-2024 02:42 PM
Greetings,
Is the printer in an error state?
If not, I'd remove the device from my Printers and Scanners Applet (-) minus button. Following this I would uninstall its drivers from the applications folder. Now disconnect the USB cable.
Then restart my MAC.
Now visit the support portal and download a fresh copy if its driver for ElCapitan
Canon Support for imagePROGRAF iPF6000S | Canon U.S.A., Inc.
Run the installer and connect the printer when prompted.
~Rick
Bay Area - CA
~R5 C (1.0.7.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It
07-04-2024 02:42 PM
Greetings,
Is the printer in an error state?
If not, I'd remove the device from my Printers and Scanners Applet (-) minus button. Following this I would uninstall its drivers from the applications folder. Now disconnect the USB cable.
Then restart my MAC.
Now visit the support portal and download a fresh copy if its driver for ElCapitan
Canon Support for imagePROGRAF iPF6000S | Canon U.S.A., Inc.
Run the installer and connect the printer when prompted.
~Rick
Bay Area - CA
~R5 C (1.0.7.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It
08-28-2024 07:11 AM
Thank you for this helpful advice!
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.