10-09-2023 04:06 PM
I can't figure out how to get rid of the black lines that you'll see in my photo. Does anyone have advice? Thanks.
10-10-2023 02:00 AM
I would run through all of the maintenance settings. Head nozzle check, head cleaning (deep, uses the most ink), I'm using a Pro-2000, 2100, and 6100, so my settings may be a little bit different.
It also maybe the paper size configuration. That may not be the right word for it. There is a tool which allows you to print a sheet and measure with a ruler to see if the printer is physically printing at the correct scale. It looks like the size of the print head is where you're getting a hairline of overlap and perhaps the machine is thinking it is moving the paper exactly the length of your print head, but it needs that value reset.
01-27-2024 02:51 AM - edited 01-27-2024 02:51 AM
Hello! I am having the same exact issue. It is either overlapping banding lines or I'll get thin white gap lines.
Have you resolved this issue?
01-31-2024 04:26 PM
I'm having the same problem. Did anyone find a solution?
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.