04-07-2022 03:15 PM
Occasionally a gradient of cyan appears at the beginning of a print, and gradually fades out to the normal color. When this occurs and a nozzle check administered, there is cyan appearing in the photo gray grid, group 1.
In the image the contaminated gray is pictured on the left, normal nozzle check on the right.
This happens almost daily.
Does anyone know if this is a head issue, or some other problem?
Any commiseration or help is greatly appreciated.
Thanks, Krista
04-08-2022 02:55 PM
Hello.
If genuine Canon brand ink is being used, there may be an issue with the printer itself. For additional assistance with print head or hardware related matters, please contact our phone support group at 1-800-423-2366.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.