cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Cannon Colorwave 3600 Prints are thick and blurry.

PFsneakers
Apprentice

Our design office has a Cannon Colorwave 3600 for large format printing. We have several staff printing to the Cannon Colorwave 3600 with no complications. When I print, my prints have heavy print lines and text. They are blurry and raised enough to be able to feel the print. My print settings and drivers are set exactly the same as everyone else and we print from the same programs. I have had others print the same document and it prints fine. I cannot resolve the problem.

1 ACCEPTED SOLUTION

PFsneakers
Apprentice

Was able to resolve through dealer support. Issue was caused by hidden resolution setting within the program printing the documents.

View solution in original post

2 REPLIES 2

Danny
Moderator
Moderator

Hi, PFsneakers!

Thanks for posting! While our forum community members are welcome to chime in, Canon does not provide direct support Canon ColorWave-series products. Instead, your dealer will be able to help you! If you don't have a dealer and you're in the United States, please call us at 1-800-OK-CANON (1-800-652-2666) and we will be happy to provide you with the names of dealers in your area.

If you're outside the USA, visit http://global.canon and choose your country or region from the map for local support.

We hope this helps!

PFsneakers
Apprentice

Was able to resolve through dealer support. Issue was caused by hidden resolution setting within the program printing the documents.

Announcements
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!