cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

wireless printer

gkink26946
Apprentice

Wen just got a fiber optic router.  The desktop, both laptops, iPads and iPhones connected just fine.  The problem we is we could not connect the printer, MX922.  Thinking its was the printer we bought a canon TS6420, the same problem.   During the set up process it skips the part to input the router and will not connect.  Any one have any suggestions?

1 REPLY 1

Patrick
Product Expert
Product Expert

Hi gkink26946,

Some routers will not allow for connecting the printer using the printer's display interface.

In cases such as these, WPS is used.

Please refer to your router's documentation for information on how to use WPS with your router.

Once you have determined your router's WPS method, please use the links below:

PIXMA MX922 WPS Setup

PIXMA TS6420 WPS Setup

 

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.