01-24-2025 12:57 PM - last edited on 01-25-2025 09:49 AM by Danny
I have a client where we need to set up a TM305 Z36 printer on a windows 11.
I can ping, access the UI, but when I run the drivers, and it searches for a printer, nothing pops up. The printer is networked as many others use it in the building.
Solved! Go to Solution.
01-28-2025 12:32 PM
I did another check and it was a PC hardware issue. The TM305 does not support ARM-based/SnapDragon processors so it was not installing the drivers.
01-28-2025 12:22 PM
Hi pconchas,
If the setup wizard doesn't find the imagePROGRAF TM-305, please ensure the Windows 11 PC is on the same segment of the network as the printer. If the TM-305 and Windows 11 PC are on the same segment, please ensure your firewall or antivirus software is not blocking the printer. I hope this is helpful.
01-28-2025 12:32 PM
I did another check and it was a PC hardware issue. The TM305 does not support ARM-based/SnapDragon processors so it was not installing the drivers.
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.