cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Set up wireless on MX430 printer

Zoomzoom300hp
Apprentice

how do you toggle from numbers to letters .  I want to put in my password   in and cannot get  to letters MX430 printer

there is no mention and holding down number  doesnt change it ????

1 ACCEPTED SOLUTION

warminaz
Apprentice

I had the same problem!  I finally had to call Canon - person on other end was VERY helpful and friendly, so don't be afraid to call them if you need to - I couldn't figure it out without calling them - but, I don't remember exactly how to do it now without having that "keyboard" up on the printer, but it involves using the "arrows", etc., - just play around with it - you'll get it. Once you figure it out...it's easy, of course!

View solution in original post

3 REPLIES 3

warminaz
Apprentice

I had the same problem!  I finally had to call Canon - person on other end was VERY helpful and friendly, so don't be afraid to call them if you need to - I couldn't figure it out without calling them - but, I don't remember exactly how to do it now without having that "keyboard" up on the printer, but it involves using the "arrows", etc., - just play around with it - you'll get it. Once you figure it out...it's easy, of course!

Thanks you would think somewhere in print on The so called WiFi brochure it would explain this

Michael
Product Expert
Product Expert

Hello Zoomzoom300hp.

 

When you are entering the encryption key using the 'Standard Setup' method, please use the Tone or star (*) button on the unit.  This will allow you to switch between uppercase, lowercase and number entry.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!