11-27-2012 08:41 AM
how do you toggle from numbers to letters . I want to put in my password in and cannot get to letters MX430 printer
there is no mention and holding down number doesnt change it ????
Solved! Go to Solution.
11-27-2012 03:41 PM
I had the same problem! I finally had to call Canon - person on other end was VERY helpful and friendly, so don't be afraid to call them if you need to - I couldn't figure it out without calling them - but, I don't remember exactly how to do it now without having that "keyboard" up on the printer, but it involves using the "arrows", etc., - just play around with it - you'll get it. Once you figure it out...it's easy, of course!
11-27-2012 03:41 PM
I had the same problem! I finally had to call Canon - person on other end was VERY helpful and friendly, so don't be afraid to call them if you need to - I couldn't figure it out without calling them - but, I don't remember exactly how to do it now without having that "keyboard" up on the printer, but it involves using the "arrows", etc., - just play around with it - you'll get it. Once you figure it out...it's easy, of course!
11-29-2012 05:17 PM
11-28-2012 12:53 PM
Hello Zoomzoom300hp.
When you are entering the encryption key using the 'Standard Setup' method, please use the Tone or star (*) button on the unit. This will allow you to switch between uppercase, lowercase and number entry.
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.