cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MP drivers/IJ scan utility will not load in windows 11.

fulmerfamily4
Apprentice

I had to remove and reinstall my MX922 on all the the windows 11 pcs on my home network after some network problems.  After doing so, the printer shows up but I can't get the scanner drivers to install.  I have removed and reinstalled the MX920 series MP Drivers Ver.1.01 (Windows) several times.  I also found topics here where it says to remove the printer then uninstall the driver.  The problem is that the drivers don't show up in my apps list like the topics say they should so that I can remove them.  All of the pcs are acting the same way.  Have even tried running the installation software as administrator and nothing works.  The scanner on each pc was originally loaded when they were running windows 10.  I need to get my scanner working on at least one pc.

3 REPLIES 3

ArthurJ
Product Expert
Product Expert

Hi,

Just to confirm, when you reinstalled the printer/scanner driver, were you installing the MX920 series MP Drivers Ver.1.01?

We look forward to your reply. 

fulmerfamily4
Apprentice

Yes, the version off the web site, mp68-win-mx920-1_01-ea32_2.exe.  The small installer window comes up, runs through a completion bar and then disappears.  None of the IJ programs install.

fulmerfamily4
Apprentice

Finally figured it out.  The mp68-win-mx920-1_01-ea32_2.exe file was not extracting.  I opened and extracted it manually with 7zip.  Then I ran the setup64.exe in the DrvSetup folder and the setup.exe from the SCNUTIL/ScanUtility folder.  It all seems to work now.

Announcements
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!