07-07-2022 05:17 PM - edited 07-07-2022 05:18 PM
My GX7050 (Firmware 1.090) ist located in my office about 2m away from a WiFi AccessPoint (same WiFi-Settings as the router, wired LAN connection to the router). But the printer always connects to the router WiFi, which is two floors below the office. This results to low signal strength (Printer UI says 38%) and connection loss (printer is shown offline, no connenction to remote UI). All other devices in the office connect to the nearest access point, but the printer refused to to so.
How to make the printer connect to the access point with better or best signal strength?
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.