Showing results for 
Show  only  | Search instead for 
Did you mean: 

Firmware 4.040 was installed on my PIXMA MG6620 and Quick Menu Suite won't launch from desktop.


The Quick Menu Suite which contains scanner settings is not launching from the desktop. I can launch it from the printer but I don't have all of the options available that the desktop Quick Menu provided.  I have reloaded the setup drivers but no fix. I believe that the firmware is preventing Quick Menu from launching from the desktop as well as from the Windows Start menu. Please advise.  Thank you.

Btw, this is a Windows 10 - 64 bit OS


Product Expert
Product Expert


I see you reinstalled the setup drivers but If you have not done so, please click HERE and select software and drivers. Then, scroll down and click load more and try installing the quick menu file by itself. After the file is installed, restart your computer and see if it will come up. 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I downloaded and installed the updated Quick Menu then rebooted the PC. What happened upon clicking QM: a box appeared saying "checking printer status," and then the box disappeared. I saw the black box appear which was the Quick Menu program but it quickly disappeared. I don't what is hindering the launch of QM.  Launching using Administrator privileges doesn't change the outcome.

08/18/2023: Canon EOS R5 C training series is released.

07/31/2023: New firmware updates are available.

CR-N700 - Version 1.2.0

CR-N500 - Version 1.3.0

CR-N300 - Version 1.3.0

CR-X300 - Version 1.1.0

06/30/2023: New firmware version is available for EOS-R5 C

05/31/2023: New firmware updates are available.

EOS R6 Mark II - Version 1.1.2

EOS R6 - Version 1.8.2

EOS R7 - Version 1.3.1

05/18/2023: New firmware updates are available.

EOS Rebel T100 - Version 1.1.0

EOS Rebel T7 - Version 1.2.0

EOS 5D Mark IV - Version 1.4.0

EOS 6D Mark II - Version 1.2.0

PowerShot Elph 360HS - Version

PowerShot SX420 IS - Version

PowerShot 620 HS - Version

PowerShot SX720 HS - Version

PowerShot G1X Mark III - Version

PowerShot G7X Mark II - Version

PowerShot G9X Mark II - Version


04/20/2023: New firmware version 1.4.1 is available for EOS R3

03/30/2023: New firmware updates are available.

EOS R5 - Version 1.8.1

EOS 1DX Mark III- Version 1.7.1

Speedlite EL-1 - Version 1.0.2

03/30/2023: Product Advisory for EF50 F1.2 L USM

03/30/2023: Product Advisory for EOS R10

02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5