Showing results for 
Show  only  | Search instead for 
Did you mean: 

Connectivity to ImageClass LBP612Cdw


I have had the ImageClass LBP612Cdw for about 2 years with no problems. Recently it started connecting to my wifi network only when I turned my wifi on my computer off and then back on. Now it won't connect at all and I cannot see it on my network. I have power cycled the printer several times. The printer connects to the network but it isn't visible on my phone or computer. 

I am running macOS Monterey version 12.4 on my computer. I have searched for how to reset the printer but I can't find instructions for that online. Not sure if that would even help or not. 

Any help would be greatly appreciated. 




I had a similar issue with my Canon Imageclass MF743cdw printer. In my situation I have an Eero wireless network throughout the house with multiple Macs, iPhones and iPads all trying to print to my MF743cdw. I found two ways to address the "printer not found issue" (after quite a bit of trial and error). First, I found that my printer was often getting a new IP address from the Eero network via DNS which resulted in the Macs no longer being able of connect (as apparently the Apple printer add features locks in a fixed IP address). To solve this I checked the IP address assigned to the printer and then went into the network settings on the printer and changed the IPv4 settings to use fixed address and added the IP address from above. I then went into printer settings on all my Macs, deleted the auto selected printer and re-added the printer by using the IP address (not the auto). This seemed to work until it didn't. Apparently my Eero network would still change the IP ranges and sometimes the fixed address would be out of range and my Macs could no longer connect. This was a bit of a head scratcher having not achieved a CCIE or CCNA certification. The more elegant solution is to have your router fix (or reserve) the printer IP address. This will ensure that the network always assigns the same IP address to the printer...and your Macs will no longer lose connection. 

Product Expert
Product Expert

Hello Dfle,

If the Mac is unable to find the printer and you have to turn wifi off and on, it looks like there is a drop in network communication. You can check if the Mac can reach the printer by retrieving the printer's IP v4 address. Once you have the printer's IPv4 address, you can open a web page on the Mac and enter the printer's IPv4 address into the address bar.

If you are unable to reach the printer's login page, you can try unplugging your router from the power for 5 seconds and then plugging it back in. Once the network is back up, you can check if you can reach the printer page and if the Mac can add the printer.

If you are able to reach the printer's login page but you can't add the printer, you can try moving the printer so it has a better signal from your router or you can try turning off any security software that might be blocking the connection for the printer.

If you continue to have issues, I would suggest contacting support at 1-800-652-2666. Our agents would be happy to assist with the issue.

03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version is available for EOS-C500 Mark II
05/26/2022: New firmware version is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version is available for EOS R5 C
03/23/2022: New firmware version is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.