Canon Community Canon Community

New Contributor
Posts: 1
Registered: ‎07-10-2020

Pixma mx922 not powering on

My PIXMA MX922 was purchased new in 2015.  It has been working fine since then.  Starting today, the printer will not power on properly.  When plugging it in, the small blue LED on the "COPY" button illuminates.   However, pressing the power button does not power-up the unit. I verified that the outlet that the printer is plugged into does in fact have power.   I've also tried it with a power strip (rather than plugging directly into the wall).   No go. 


I have tried disconnecting the power cord for various times (10 minutes, 15 minutes, 30 minutes) then reconnecting it, with no results. 


Appreciate any assistance you can provide.

Esteemed Contributor
Posts: 3,539
Registered: ‎11-19-2017

Re: Pixma mx922 not powering on


Excellent troubleshooting on your part.  Unfortunately, it doesn't sound good.  Sounds like the printer's power supply or controller board has failed or malfunctioned. 


Last step.  Press and hold the power button for 30 sec.  Now disconnect from the wall outlet..  keep pressing the button.


Now release the button.  Wait about 30 sec, reconnect to power and press the power button again to turn on.  Works, great..  


If no...


You can contact canon and investigate repair options, but I would replace it given its age.  The cost to ship and repair often exceeds the cost to replace it.      

Bay Area - CA
~6D2(v1.1.0) ~Many Lenses ~DxO PhotoLab Elite ~Windows10 Pro ~EVGA RTX 2080 FTW3 Ultra ~Pixma Pro-100 ~ImageClass MF644Cdw ~LBP622dw
powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement