01-22-2013 02:17 PM
Hello,
I am suddenly having problems with my S100. It will not take the picture when I press the shutter release. In case I had accidentally changed something, I did a Reset to Defaults. Then it worked, briefly, before returning to not working. It also would not let me change My Colors. Everything else seems to be working fine. Any ideas?
02-26-2018 06:09 PM
... and yet according to Canon it is not a know defect.
02-26-2018 06:17 PM
incredible! The old CYA
02-27-2018 10:31 PM - last edited on 02-27-2018 10:46 PM by Crista
Looks like there is no where one can get the spare part #7226 020. I am heading for Japan in a few more weeks and see if I have any luck there. However, I just found a guy who made a hack repair on his S100 shutter switch. If I come to a dead end, I may try that too. His simply soldered the "double layer switch: one for focusing and one for taking picture" together to make it work. So it will focus and take the picture at the same time. Here is his link. I am not sure if this has been posting in this site before or not. [Mod Note: Link removed per Forum Guidelines]
02-27-2018 10:49 PM
See this is another reason why I bought a used working S100 which still works, there is plenty of repair info out there!
One thing came to mind after reading his "fix" which I would consider instead of having it focus and shoot at the same time. Instead of jumpering out the exposure side of that switch in paralell with the focus side why not run the wires out of a small hole drilled thru the top cover then attach them to a small button type switch which could be fixed to the top with glue or even velcro. Then you'd still have the same control over focus with just a seperate switch for exposure nearby?
Just a thought
02-28-2018 12:32 AM
Ha, ha, may be you can even use a voice activated switch so that you don't have to use two fingers:-) I didn't know you cannot put web link here but this guy is called Martin Jones and his article is called Canon S100 Shutter Button Fix. See you can look it up. (martin-jones.com/2018/02/04/canon-s100-shutter-button-fix/)
02-28-2018 07:23 AM
02-28-2018 07:07 AM
03-01-2018 03:31 PM
I'm sorry to report that it was a coincidence. Blink detection has no affect. My shutter will sometimes not work either way. It's amazing to me that the camera will work fine for 3 days and then stop working.
03-01-2018 03:53 PM
Don't worry, it will stop working altogether eventually. Have you tried the warming method? Shoot some video and then take a still.
07-24-2013 10:40 AM
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.