I am suddenly having problems with my S100. It will not take the picture when I press the shutter release. In case I had accidentally changed something, I did a Reset to Defaults. Then it worked, briefly, before returning to not working. It also would not let me change My Colors. Everything else seems to be working fine. Any ideas?
Are you actually re-soldering (adding new solder) or just re-heating / reflowing the existing solder on those points?
Reheating was enough for my case. Still, I do not know how long will it last. Now it is working but I doubt the joint is better than when it was done in factory, under proper reflow soldering profile, which guarantee that all the termal stresses are relaxed, and with a new soldering paste. If/when it failes, then I wilI try to remove old solder and put a new one.
Thank you! I can confirm that this fixed my S100 also (!) ... after six years of sitting in a box. I watched the solder closely under a magnifying glass until I could see it just turn to liquid and sag from the heat, almost 2 full seconds with the very tip of a hot, pointed iron. After pulling away the solder re-hardended and I could immediately take pics with the little white button.
Who knows how long it will last, but it's an easy fix to do again if I have to and it's nice to have this little cam to use again.
Is there access to, or a bit of space underneath the shutter switch, where you might be able to add in a thin spacer or a shim of some sort to support the switch more solidly? Maybe this would relieve the solder joints from the stress of additional flexing of the PC by continued shutter button usage. Might help to make your repair more permanent.
If it were me I would apply epoxy around the base of the switch that will take the stress off the joints. If or when mine fails in this same manner that is exactly what I will do. I would only take the time to do that because I have the waterproof case for it which by itself is worth more than a used, working S100. One thing I would not do is just do the solder repair and put it all back together again.
09/26/2023: New firmware updates are available.
08/18/2023: Canon EOS R5 C training series is released.
07/31/2023: New firmware updates are available.
05/31/2023: New firmware updates are available.
05/18/2023: New firmware updates are available.
03/30/2023: New firmware updates are available.