01-22-2013 02:17 PM
I am suddenly having problems with my S100. It will not take the picture when I press the shutter release. In case I had accidentally changed something, I did a Reset to Defaults. Then it worked, briefly, before returning to not working. It also would not let me change My Colors. Everything else seems to be working fine. Any ideas?
06-22-2014 10:17 PM
06-23-2014 02:10 AM
Mine is an S100 Model:PC1675 Serial No: 45203200XXXX
06-23-2014 11:23 AM
07-02-2014 08:41 AM
Same stuff here. Shutter release button stopped working after about 6 months of quite heavy use (around 50.000 photos shot). First it still continued when pressed from the angle, not straight down. Now completelly dead. Since on warranty was sent back for repair.
Bought in europe (netherlands).
07-02-2014 08:46 AM
There is very little doubt in my mind now that these problems are not related to the mounting of the circuit board directly below the shutter switch..it either works its way away from the button over time thus pushing the button does not work or comes loose in some fashoin. At this point I'd bet money on it.
07-02-2014 03:49 PM
06-23-2014 02:31 AM
06-23-2014 03:25 AM
Mine is 43303200XXXX
06-22-2014 06:01 PM
Anyone on Twitter with this issue it, might be worth letting @CanonUSA and @CanonUSAimaging know how you feel!
06-23-2014 04:06 AM
Mine is 44213200XXXX.
03/02/2023: New Firmware Updates Are Available:EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.