08-11-2014 03:53 PM
i have an oldish powershot a560
i am tired of it claiming batteries are dead when they aren;t
i was thinking
it takes 2 AA batteries
i have been using eneloop rechargeables
what if i replace them both with one 14500 lithium cell?
will fill one cell holder with aluminum foil so it conducts
the voltage will be 3.7V instead of the max that 2 carbon-zinc cells could do, which is 3.30..
is the camera going to work, not work, complain, blow up, burn up, lose some functions, be damaged permanently?
wle
08-19-2014 08:12 AM
ok thanks
i won;t do it
another problem is, 1 lithium rechargeable would last about the same amount of time, they don;t have enough mAH [energy storage] anyway, compared to 2 AA n imh cells
wle
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.