01-04-2019 07:29 AM
hi im total newbie in photography, can anyone please help me what to do or how to fix this because when i take a pic i see some odd colors (i dont know what that is) in my lcd. i have a canon powershot sx540. Thank you!
01-04-2019 08:52 AM
Does it show up on the computer? If it does you have a bad sensor. If not, you have a bad display.
01-04-2019 11:04 AM
Send it back for exchange or repair, I think you got a lemon.
01-04-2019 11:17 AM
A couple things you can try...Look in your manual, pages 71 & 72 and see if you accidentally changed those, the white balance and colors settings. Make sure the white balance is on auto (AWB) and My Colors is set to Off
01-04-2019 05:00 PM - edited 01-04-2019 05:09 PM
It's possible that the LCD was displaying the highlight blinkies (designed to show where there's too much light) even though for most cameras it's just in one color. You might want to check the menu and manual on how to disable it, since it's an option. It's one possibility to rule out, anyhow.
When in doubt, reset the camera back to factory default and try again.
01-04-2019 07:35 PM
i tried resetting it but nothing works. haha
01-04-2019 07:57 PM
I do not think a "reset all" resets the My Colors or the White Balance, those you have to go in and check them manually
01-04-2019 09:03 PM
01-04-2019 09:41 PM
The manual can teach you, 2 pages, 71 & 72 tells you everything you need to know...good luck
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.